Selection
- Selection 1 Entity
- Defines the first point of measurement. You can choose between the following entities:
Point, Edge, Arc,
or Plane.
- The Selection 1 Entity is always the machined stock.
- Selection 2 Entity
- Defines the second point of measurement. You can choose between the following
entities: Point, Edge,
Arc, or Plane.
- You can specify Other to indicate that the Selection
2 Entity is another entity, such as a tool or a part.
Measure Results
- Point
- Displays the point measurement.
- Point
- Displays the point measurement.
- Angle
- Displays the angle measured.
- Distance
- Displays the distance measured.
|