- Machining Operation:
- This shows the Machining Operation name
- Tool:
- This shows the Tool name.
- Pick point:
- This shows the Pick Point position.
- Plane equation:
- This shows the plane equation.
- Wall thickness:
- This shows the thickness of the wall.
- Arc Radius:
- This shows the Arc Radius.
- Arc center:
- This shows the Arc center dimension.
- Deviation:
- This shows the measured distance between the rough stock and the designed target part during a simulation.
- Current, Initial, and Removed volume:
- These gives the information of the measurement of volume of the in process rough stock during the course of the simulation.
|