Deactivates the selected point in the pattern. An O symbol indicates that the point
is omitted from the pattern. A deactivated point can be activated in the pattern again.
Edit Entry Distance and Edit Exit Distance
Lets you locally edit Entry and Exit distances at individual points. This can be
useful for locally specifying a clearance that is greater than the one defined by the
jump distance.
Edit Instruction Set
Lets you set a particular instruction set on this point, Approach
Instruction set and Fastening Instruction set.
Edit Local Axis
Lets you locally modify the tool axis at a point.
Invert Selection
All omitted points are retained in the pattern again; pattern points become omitted
points.
Renumber
Lets you renumber points in the pattern. Only available when Pattern
Ordering mode is set to Manual.
Select All
Includes all the omitted points in the pattern again.
Set as Start Point
Lets you choose the start point for the pattern.
Rivet Table
Synchronize Manufacturing Fasteners
Updates the manufacturing fasteners with any modifications made to the parameters in the rivet table which are not
editable by the user.
Also updates the manufacturing fasteners with any new parameter created in the rivet table.
View
Opens the rivet table in an .xls format.
Manufacturing Fasteners
Selected Objects
Reverse Axis Direction: Inverts the axis of selected manufacturing fasteners.
Modify Axis Direction: Re-evaluates axis values of a given
line or surface when a manufacturing fastener is linked to a design point.
Modify Lateral Direction: Modifies the lateral direction of
selected manufacturing fasteners.
Visualize Fastener Offsets: Displays the offset of the
selected manufacturing fastener in the 3D area.
Modify Tail Frame: Modifies the tail frame of the selected
manufacturing fasteners point using a manipulator.
Hide/Show 3D Rep: Hides or shows 3D part representation of
selected manufacturing fasteners.
Remove 3D Rep: Deletes the selected 3D part
representation.
Update: Re-evaluates a manufacturing fastener origin from a geometry.
Reconnect: Manually or automatically reconnects broken
geometries when possible.
Manufacturing Pattern
Selected Objects
Hide/Show Lateral Direction: Hides or shows lateral 3D
representation of selected manufacturing patterns.