View Section

The View section provides commands for hiding or showing machining elements.

Notes:
  • Hiding objects requires Shading (SHD), otherwise they are set to full transparency.
  • In Material Removal mode, for the simulation, the part design is set to full transparency, to display only the stock.
  • If Display tool path during machine simulation is activated, the modifications done with the View section commands are not saved when you exit the current session.

The following commands are available in all the sections of the action bar.


Hide/Show Machine
Hides or shows the machine.


Hide/Show Tool Path
Hides or shows the tool path.


Hide/Show Cut Stock
Sections the stock by the turning machining working plane, and hides or shows it, during an ISO code simulation or a tool path simulation.
Note: Sectioning is not possible with a milling machine.


Hide/Show Stock
Hides or displays the stock.
Only available if material removal is activated.


Hide/Show Part
Hides or shows the part.
Hide/Show Other Geometries
Hides or shows geometries inside the NC Assembly other than stock and part geometries.