Context Toolbars

New Tag Context Toolbar

The table below lists the commands available when defining the plane for a new tag. You can select a point, line, or face elements of 3D representation.

	Define Plane Define the plane by selecting a point, axis, 2D element or circle center.
	Define Origin Select a corner, center of the face, or edge on a geometry.
	Define Plane by an Imaginary Circle Define the plane within an imaginary circle by whose center is determined by three points you select.
	Define a Plane with 3 Points Define a plane with three points. The first point you select is the origin. The second is the X-axis direction. The third is used to calculate the Z-axis.
	Define Plane Using 2 Points The plane is defined by two points. The first point is the origin. The second point is the Z-axis direction.
	Define New Orientation of X-Axis Select a new orientation of the X-axis.
	Define Plane at Product Origin Select the product origin to define the plane.
	OK Confirms the plane definition and closes the context toolbar.

Auto Place Context Toolbar

	Start Begins the reachability analysis, moving the robot from one cell to another on the grid. Each cell in the grid is colored according to its reachability status.
	Pause Pauses a running reachability analysis.
	Define Grid Inputs Allows you to specify the length, width, and height of the grid, as well as how many cells it contains.
	Define Reachability Legend Allows you specify the color for each reachability status indicator (Reachable, Not Reachable, Partially Reachable, Clash, Out of Limit, Not Computed).
	Settings Allows you to specify a config or tool profile, as well as enable clash analysis.
	Save the Results Saves the results of the Auto Place analysis to a text or spreadsheet file.
	OK
	Exit Exits the Auto Place command.