About Remote Forces

A remote force is a translational load applied in a single direction. The force might be applied in one location (potentially not on the model) and transmitted to a different location on the model.

See Also
Applying Remote Forces

Click Play to watch the video:

A remote force definition consists of four components:

  • Application point
  • Direction
  • Transmission surface
  • Magnitude

The force is transmitted from the application point across the transmission surface. Applying the force at the center of the transmission surface distributes the force evenly across the surface. If you move the application point so it is not at the center of the transmission surface, the entire surface deflects accordingly. If you move the application point so it is not even touching the transmission surface, the force is transmitted as if invisible beams were connecting the application point to the transmission surface.



This treatment of forces is a very good approximation of how actual structures behave. For simple weights or direct loads, you can select several faces and apply the force at the default center location. Alternatively, the selected face might represent a connection with another part in your assembly, and the applied force occurs via contact at the transmission surface. Offsetting a force is an easy but effective way to represent a force that originates far from your part but is transmitted to your part via other assembly components.