Enabling or Disabling FCS Compressed Synchronization

You can use the set system fcssettings zipsync command to enable or disable FCS compressed synchronization.

This task shows you how to:

Enable FCS Compressed Synchronization

You can turn on the FCS compressed synchronization setting.

Use the command:

set system fcssettings zipsync on;

Disable FCS Compressed Synchronization

You can turn off the FCS compressed synchronization setting.

Use the command:

set system fcssettings zipsync off;

The table below summarizes MQL compressed synchronization commands for the inter-site case:

MQLCommands for the Inter-Site Case
sync storesync buslistsync bussync bus with zip
zipsync oncond zipcond zipcond zipforce zip
zipsync offno zipno zipno zipforce zip
  • cond zip means that the synchronization stream depends on the synchronized file extension.
  • force zip means that the synchronization stream is always compressed.
  • no zip means that the synchronization stream is not compressed.

The table below summarizes MQL compressed synchronization commands for the intra-site case:

MQL Commands for the Intra-Site Case
sync storesync buslistsync bussync bus with zip
zipsync onno zipno zipno zipforce zip
zipsync offno zipno zipno zipforce zip