-
Move the pointer over the pad if you want to select the plane as
you would do for a sliding sketch.
-
Deactivate the
Smart Mode
 to select the support manually.
-
Select the origin and orientation of the sketch.
-
Select
Parallel to line in the
Type box in the
Orientation tab to specify the absolute axis
orientation according to an edge of the flat face.
-
Select an edge of the flat face.
-
Click OK.
-
To generate a library from any sketch while editing it, perform the following
steps:
-
From the Add menu, select .
-
In the Create Library dialog box, specify a name
for the library and click OK.
Note:
The sketch should be saved in the database and the
library name should be unique.
-
Create a new 3D part using this sketch.
-
From the Tools section of the action bar, click Library Browser.
-
Expand the library classes, select an appropriate item, and then click
Instantiate on the context toolbar.
-
Click in the 3D area to position the group of geometries resulting from the library linked
to the sketch.
|