-
Select the elements to be constrained.
-
From the Sketch section of the action bar,
click
Auto
Constraint
 .
The
Auto Constraint dialog box appears. The
Elements to be constrained field indicates all
the elements detected by the
app
after selecting the profile.
-
In the
Symmetry lines box, select the vertical line
in the
work area.
All the elements in the profile that are symmetrical to the line will be detected.
-
Click
OK to constrain the
sketch including the profile and the vertical line
and, if needed, modify the location of the constraints.
The sketch is not displayed in green because it is not constrained
in relation to external elements (edges, planes and so on).
|
