-
From the Markup section of the action bar, click Measure
.
-
Select the elements to measure.
The elements can be of the following types: lines, curves, arcs, or circles.
Notes:
- The scale applied to a view in the drawing is considered for measurements. You can
create measurements in different views but you cannot create measurements between
geometries from different views.
- If the elements are selected before selecting the command, and if the selected
elements are from different views, the pre-selection is canceled.
-
Optional: Click Chain measures
or Stack measures
to create multiple measures in series or parallel combination.
Notes:
- These options are available if more than one element is selected.
- If the elements are selected before selecting the command, by default, chain
measures are created.
- If the command is selected first, you can select the option of your choice.
-
To customize the created measurement, see Customizing Measurements.
Notes:
- While switching from one sheet to another, only the persistent measures are kept
and the non-persistent measures are removed.
- Depending on the selected elements, alternative options for creating measures are
also available. The alternative measurement options can be radius/diameter, minimum
distance, maximum distance, etc.
|