Defining Validated Objects

You can define the objects that are validated during a review.

Before you begin: Create a review.
  1. In the review tabs of the review panel, under the dedicated Validated Objects area, click Add Validated Object .

    All the previously defined validated objects are already listed above Add Validated Object option.

    Note: If the context of the review is already defined as a validated object, the Add Validated Object option is not available.

  2. Select the objects to be defined as the validated objects.
    A dialog box is displayed at the top of the 3D area.
  3. Click Ok.
    The selected objects are added as validated objects.
  4. From the context toolbar, select one of the following:

    Notes:
    • You can cancel the validation process at any point by pressing Esc.
    • If the context of the review is a 3D Part, you can only define the whole part as a validated object. Therefore if you click Add Validated Object option, the part is automatically added to the validated objects list. It cannot be modified or removed from the list.
    • If the context for the review is an FL sheet, a requirement, a drawing, or a document, the context is automatically defined as a validated object. You cannot remove or modify the validated object.
    • For a review linked to interference data, the context is automatically set as a validated object. You can add more validated objects, using the Add Validated Object option.

  5. Optional: Click next to a validated object in the list in the review panel to remove the validated object from the list.
    A warning is displayed. In the message window, click Yes to remove the object from the list. You can click No to retain the object in the list.