Configure an LDAP Security Source

You can follow the procedure below to configure an LDAP security source.

See Also
LDAP Overview
OpenLDAP Security Source
Active Directory Security Source
Lotus Domino Security Source
  1. In the Administration Console, go to Search > Security Sources and click Add security source.
    1. In Name, enter a descriptive name.
    2. In Type, select an LDAP source type.
    3. Click Accept.
  2. Go to the Configuration tab and verify that the Deployed check box is selected.
  3. Under Connection, enter the LDAP-based Server Address for the security source. For example, directory.exalead.com.
  4. Enter the login credentials in Username and Password.
  5. Enter the LDAP's Authentication method.

    The default value corresponds to the default behavior for each security source.

  6. Enter the LDAP Protocol.

    The default value corresponds to the default behavior for each security source.

  7. Select an Encryption method.
  8. Enter the LDAP's search Base. For example, cn=Users,dc=office,dc=exalead,dc=com.
  9. Enter the Timeout value for the connection.
  10. To make LDAP attribute matching case-insensitive, select Ignore case.
  11. Click Apply.