Managing Impacts on Cable Routes

You can use the Network Impact Assistant on Cable Route to identify how modifications made on your network can affect the route and the length of your cables.

  1. In the tree, click an electrical physical system to analyze all its cables.
    The Impact Filter panel appears.
  2. In the panel, specify the criteria to be taken into account during the analysis:
    1. Under Cable Maturity, select a maturity status:

      Cable Maturity Description
      Released The route of cables with a "Released" lifecycle maturity are analyzed.
      In Work The route of cables with an "In Work" lifecycle maturity are analyzed.

    2. Under Route Maturity, select a maturity status:

      Route Maturity Description
      Validated Cable routes that have a "Fully validated" status are analyzed.
      In Revision Cable routes that have an "In revision" status are analyzed.
      Not Validated Cable routes that have a "Not validated" status are analyzed.

    3. Under Rules for Impact Calculation, select one or several rules:

      Checks are performed in the order of your selection.

      Available Rules Description
      Length comparison Compares the validated length and the current computed length.
      Route status comparison Compares the validated route status and the current computed route status.
      Itinerary status comparison Compares the validated itinerary and the current computed itinerary.

  3. Click Compute to start the analysis.
    • Impacted routes are listed in the Routing Assistant panel.
    • Impacts are described in two columns:
      Column Description
      Impacts Indicates the impact state of the cable route.
      Impacts Details Describes the source of the impact.

      In the columns, the following icon indicates that attributes need to be updated: . To do so, select one of the update modes:

      Automatic update

      Updates the attributes of all the listed cable routes.

      Manual update

      Updates only the attributes of the selected cable routes.

  4. Close the panel to validate.