Adding a Segment Position Point

You can add a segment position point to a connector. Segment position points are used to attach splices to the ends of segments.

Before you begin: Open a connector with a splice type.
  1. In the tree or work area, select a splice.

    Note: You can only add one segment position point per splice.

    The Segment Position Point Definition dialog box appears.
  2. In the Name box, type a name.

    Important: The name must be unique.

  3. Place the segment position point:
    1. Select the Standard tab.
    2. Click the icon.

    Important: Using the axis system is the only method to place a segment position point.

  4. Click OK to validate.

 

See Also
More help on this topic