Creating Supports

Creating Standard Supports

You can use standard supports to route segments.

  1. In the work area, select a 3D shape, and then click Support .
  2. Optional: In the Support Definition dialog box, edit the Name value.
  3. In the work area, select a point through the support.

    Note: This point defines the position of the segment routed through the support.

  4. Select a first plane to define the way into the support.
  5. Select a second plane to define the way out of the support.

    Important: The two planes must be parallel.

  6. Click OK to validate.

 

See Also
Creating Standard Supports