Filtering the Torsion Analysis Results

In the Report view of the Torsion Analysis Report, you can use filters to customize the display of the torsion information.

This task shows you how to:

Before you begin: Display the Report view of the Torsion Analysis Report.

Apply a Basic Filter

You can select the values to be displayed in the Report view of the report.

  1. Hover the pointer over a column header.
    The Column Filter command appears.
  2. Click Column Filter .
    The values contained in the column are listed. By default, all the values are selected.
  3. Clear the required values and filter the values to be displayed.
    Tip: To select or clear all the values, click Select All .
  4. Click anywhere outside the table.
    The filter is applied.
    Tip: You can customize the filter. To do so,
    1. Click Column Filter and then Custom Filter.
    2. In the Operator list, select a comparison operator.
    3. In the Reference list, select or enter a reference value.
    4. Click Apply to filter the values.
  5. To remove the filter, click and then Reset all.

Apply an Advanced Filter

You can set a custom filter and sort the values to be displayed in the Report view of the report.

  1. Hover the pointer over a column header.
    The Column Filter command appears.
  2. Click Column Filter , and then select Custom Filter.
    The Custom Filter panel appears.
  3. In the Operator list, select a comparison operator.
  4. In the Reference list, select or enter a reference value.
  5. Click Apply .
    The values are filtered.
  6. To remove the filter, click and then Reset all.