Managing Nets and Wires

Linking Existing Wires with Nets

You can link all the existing wires with nets.

Before you begin:
  • In a diagram view, connect equipments with nets.
  • In a second diagram view connect the same equipments with harness components (wires, disconnects, harness connectors...).
  1. Click the electrical system containing both nets and wires.
  2. In the Global Net Allocations dialog box, analyze the report and take the appropriate actions if needed:
    Label Description Action
    Information about an existing link between a wire and a net. This is a simple information. No action is requested.
    Validation of a link between a wire and a net. Click Apply to validate the assignment or clear the Assign the wire to the following net option to prevent the link creation.
    Tip: To validate all the links, click Accept All, and then Apply.
    Several nets can be linked to the same wire. In the Net list, you need to choose a net and click Apply.
    No link can be created. Net ends are not compatible with the wire. This is a simple information. No action is requested.
    Tip: Click to filter the information.

    In the diagram view, the wires are highlighted according to their status.

  3. Click Close.
    The links between the wires and the nets are created.

 

See Also
Linking Wires with Nets