Managing Connectors and Pins

Inserting/Removing Connector Ports and Pins

You can structure a group of connector ports, terminal connectors and pins.

This structure is displayed from the tree, under the Electrical > Ports node.

This task shows you how to:

Before you begin:

You can insert Pin1 and Pin2 under ConnectorPort1.

Select a connector .
Select the pins to be inserted under the connector .
Warning: It is not possible to select a pin/connector port/terminal connector that is already inserted under another connector port/connector component.
Click Connector Port Links to deactivate the command.
Tip: You can also deactivate Connector Port Links by clicking anywhere in the diagram view if active.

You can remove a pin or a port from a connector.

Select a connector .
The pins that are inserted under the connector are highlighted in the tree.
Select a pin linked to the connector .
Click Connector Port Links to deactivate the command.