Generating Wiring Diagram Views From Net Diagram View

You can generate a wiring diagram view in one click. The generation of the wiring diagram view is based on an existing net diagram view.

Before you begin:
  • Generate the wiring definition from the net definition.
  • When working with two systems (net and wiring), open both net system and wiring system in the same tab.
  • In Data Setup, define the symbol representation for the different electrical components.
  1. Select one of the following elements:
    • A view
    • Note: If you do not ask for the creation of a new view, the selected view will be modified.
    • One or several sheets
    • A layout
  2. From the Edition section of the action bar, click Generate Wiring Diagram .
  3. Depending on the source element selected in Step 1, select one of the following elements:
    • A view or a sheet if the source element is a view.
    • A layout if the source element is one or several sheets or a layout.

    Note: The parameters applied to the sheet of the wiring diagram view are the same as the ones applied to the sheet of the selected net diagram view.

    If the net diagram view is not generated after modifying the parameters using Wiring and Net Diagram Generator Parameters , the parameters will not be applied to the sheet of the wiring diagram view.

 

See Also
More help on this topic