Generating Wiring Data from Net Data

You can generate wiring data according to a net definition and the equivalent routing of the nets in the 3D mockup.

It creates cables, wires, and intermediate connectors that implement each net group. It connects those created elements to keep the electrical connections. It chooses compatible harness connectors to connect to logical equipment.

Before you begin:

Create the wiring system under which the wiring data must be created.
Create an implement link between the net system and the wiring system.
Under the wiring system, create the equipment system.

In the Net to Wire Assistant dialog box, define one of the following elements:
- Net system
- Wiring system
In the Net group node box, select the net group under which the net definition is stored.
Select the input netgroup in the Generate Wiring column.
Select the wiring equipment system.
Click to generate the wiring data.