Managing Nets and Wires

Associating Nets/Net Groups with Wires/Cables

You can create or remove links between a net/net group and one or more existing wires or cables.

Note that the following associations are available:

A net: with one or several wires
A net group: with one or several cables
A wire with only one net
A cable with only one net group

Before you begin:

Define a harness component .
Create a net .
Define two wires .

In the tree or in the diagram view, select the net .
Important: If the selected net is already associated with wires or cables, they are highlighted in the tree.
Select the two wires to insert them under the net.
Warning: It is not possible to select a wire/cable that is already associated with another net.
To remove a link, click the wire.
Deactivate Net/Wire Links .