Linking Wires or Cables to a Cable

You can structure a group of wires and cables by linking them to a cable.

This structure is displayed in the tree, under the logical reference, in the Electrical > Wires node.


Before you begin:
  • Create a logical reference .
  • Create a cable (Cable1).
  • Define two wires (Wire1 and Wire2).
  1. Select a wire and then select the cable .

    Important: A wire or a cable already inserted under another cable cannot be selected.

    The wire is inserted under the cable.
  2. Click Cable Links to deactivate the command.
  3. To insert the second wire, click Cable Links and select the cable.
  4. Select the second wire.
    From the Electrical > Wires node, Wire2 is removed from Cable1. It is now positioned at the same level as Cable1.
  5. Click Cable Links to deactivate the command.