Creating Contacts and Operating Devices

You can create contacts or operating devices for relays.

  1. From the Edition section of the action bar, click Create New Reference .
  2. In the New Content dialog box, click one of the following elements:
    • Logical Relay Contact
    • Logical Operating Device
  3. Enter a name for the contact or the coil.
  4. Create component ports under the contact or the coil:
    1. From the Edition section, select Create Port .
    2. In the New Content dialog box, expand Electrical Logical and select Logical Component Port.
    3. In the Logical Port dialog box, enter a name and select a direction.

      Note: For more information about ports direction, see Creating Logical Ports.

    4. In the System Type Association dialog box, select the convenient option.