Create Harness Connectors

You can create harness connectors.

Click Play to watch the video:

  1. Select the electrical system and from the Edition section of action bar, click Create New Reference .
    The New content dialog box appears.
  2. In the New content dialog box, expand the Electrical Logical tab and select Logical Harness Connector.
    The Logical Harness Connector dialog box appears.
  3. In the Logical Harness Connector dialog box, enter a name for your harness connector.
  4. Select the Content tab.
  5. In the Number box, enter 4 as the number of pins to be created.
  6. In the First Name box, enter the name of the first pin and click Add.
    Four pins appears in the Pins To Be Created area.
  7. Click OK to validate the creation of the harness connector.
    A harness connector is created under the logical reference. A Ports node is also created under the harness connector. It aggregates the four pins.
  8. In the tree, select the harness connector you have just created and from the Edition section of the action bar, select Create From Existing Reference .

The two harness connectors with their pins are created in the tree.