Place Harness Connectors in the Diagram View

You can place harness connectors in the diagram view.

Before you begin: In Me > Preferences > App Preferences > 3D Modeling > Systems Architecture > Electrical Sys. Design > Schematic, select Display all pins option. For more information, see Native Apps Preferences Guide: Schematic.

Click Play to watch the video:

  1. Double-click the diagram view.
    The diagram view is activated.
  2. Right-click the first harness connector and select Place in View.
    The symbol representation appears and follows your pointer.
  3. Click the diagram view to place the symbol representation.
  4. On the context toolbar, Click Display Connector and Pins.
    The Manage Connector and Pins display dialog box appears.
  5. In the Step box, define the distance between the pins.
  6. In the Offset box, define the distance between the top of the connector and the first pin.
  7. Select the four pins and click OK.
    The pins appears on the harness connector symbol.
  8. Repeat Step 7 to place the second harness connector in the diagram view.
  9. Click the second harness connector's symbol and on the context toolbar, select Flip Horizontally.