Create Symbols Representations

You can create a symbol representation for harness connectors.

Click Play to watch the video:

  1. Select the first harness connector and from the Edition section of the action bar, click Insert Symbol Representation .
    The Logical Symbol dialog box appears.
  2. In the Title box, enter a name for your representation.
  3. Click OK to validate.
    A symbol representation node is created in the tree. It contains a symbol object.
  4. Double-click the representation.
    The symbol representation is edited in the Symbol Design app.
  5. From the Symbol Edition section of the action bar, click Create Circle .
  6. Click the work area to position the circle center.
  7. Enlarge the geometry and click to validate the circle creation.
  8. Drag the bottom manipulator to transform the circle into an arc.
  9. Click Create Polyline and draw the top and the bottom of the connector.
  10. Click Create Line draw the left and right sides of the connector.
  11. Right-click the left side of the geometry and select Switch to Stretchable/Non Stretchable > Stretch in Both Directions.
  12. Repeat Step 11 for the right side of the geometry.
  13. Click Exit App from the Symbol Edition section of the action bar.

The symbols representations are created for both harness connectors.