Inserting, Moving and Deleting Rows in Technological Tables

You can insert and move rows to fully design a technological table.

This task shows you how to:

Before you begin: Create or open a technological table.

Insert a Row

You can insert a row at a specific place or not. Rows are inserted one by one.

Select any cell in the row below where you need to insert a row.
From the Engineering Specification Edition section of the action bar, click Add Row.
The new row is inserted and contains the same value, if any, as the row above.
Note: To increase the number of rows in a technological table, click Add Row as many times as required.

You can move rows downward or upward.

To move a row in the direction of interest, from the Engineering Specification Edition section of the action bar, click one of the following options:

Option	Description
Move Row Down	Moves the row downward.
Move Row Up	Moves the row upward.

The row containing the selected cell is moved upward or downward.

Tip: You can select multiple cells using Ctrl or Ctrl + Shift. Each row containing a selected cell is moved.

You can delete rows.

Select a cell.
From the Engineering Specification Edition section of the action bar, click Remove Row .
The row containing the selected cell is deleted.