-
Select the closed
profile on which you are going to base the cutout.
-
Prism
is the default shape definition. You can also select
Sweep
.
-
From the Type list under
Floor, select Length
and specify the required length.
-
From the Type list under
Opening, select Length
and specify the required length.
-
In the Direction box, select the reference
element.
-
In the Draft tab, specify the required draft
options.
-
In the Fillet tab, specify the required fillet
options.
-
Clear the
With floor check box .
As indicated by the pointer, the cutout has no floor.
-
Define the wall direction to control whether the wall is
constructed inside or outside of the selected profile. The default is an
outside wall thickness.
-
From the Type list under Wall
select one of the following options to define the wall thickness:
|