-
Select a shape
definition.
Prism
 is selected as the default shape definition.
Note:
The dialog box for the feature changes according to the
options offered by the shape.
-
Select the
profile you want to
extrude.
- In the Limits tab under First Limit, select the type and enter the required parameters.
- Optional:
Click Mirrored extent
 or under
Second Limit, select the type and enter the required
parameters.
- Optional:
Under Thin Properties (available for prism, sweep, and revolve
shapes) select the Use param for thin feature check box, select a
reference element and enter the required thickness values ().
-
Select the Use param for thin feature check box to specify
the thin feature parameters.
-
From the Reference list, select a reference type.
-
Enter the inside and outside thickness values.
This option enables you to add material on both sides of the profile. Note:
The core feature cannot be added to the added feature.
If you need to add a core feature, you need to use a protected feature.
- Optional:
In the Draft tab, select the
required draft options.
- Optional:
In the Fillet tab, select the
required fillet options.
|
to sketch the profile.