-
In the
Boss.X dialog box, select a closed
profile.
-
In the Length boxes under Ceiling
and Opening tabs, enter the required values.
The ceiling length defines the distance from the sketch plane up to the
ceiling and the opening length defines the distance from the sketch plane up to
the opening.
-
Click
Mirrored extent
 to
extrude the profile in the opposite direction using
the same length value as the one defined for the first length.
-
To define the direction of the boss, select the required reference
element in the
Direction box.
By default, the boss is created in the direction normal to the
profile.
-
In the Draft tab, specify the following draft parameters
as required.
-
In the Fillet tab, specify the following fillet
parameters as required.
-
Under
Wall, select the direction for the
construction of the wall (inside or outside).
|
to sketch the profile.
to reverse the extrusion direction.