Creating Functional Edge Fillets

You can fillet the edges at the intersection of functional features using Functional Edge Fillet.

This task shows you how to:

See Also
About Functional Edge Fillets

Create Fillets at the Intersection of Several Features

You can apply the fillets at the intersection of the features with Create fillets at the intersection of several features.

  1. From the Refine section of the action bar, click Functional Edge Fillet .

    The Edge Fillet.x dialog box appears.

  2. Click Create fillets at the intersection of several features as the Fillet Definition.
  3. In the First Operands box, select first feature from the tree.
  4. In the Second Operands box, select second feature from the tree.
  5. In the Radius box, specify the required value.
  6. Click OK.

    The fillets are applied on the edges at the intersection of the selected functional features as shown below. A new feature (identified as Edge Fillet.x) is added to the tree under the Solid Functional Set.x node.



Create Fillets on Full Edges

You can apply the fillets on the entire edge even if a part of the edge is selected using the Create fillets on full edges option.

  1. Click Functional Edge Fillet .
    The Edge Fillet dialog box appears.
  2. Click Create fillets on full edges as Fillet Definition.
  3. In the Object(s) to fillet box, select an edge as shown below.


  4. Define the Radius value.
  5. Click OK.

    The fillet is applied on the entire edge. A new feature (identified as Edge Fillet.x) is added to the tree under the Solid Functional Set.x node.



Create Fillets on Relimited Edges

You can apply the fillets only on the selected edges using the Create fillets on relimited edges option.

  1. Click Functional Edge Fillet .
    The Edge Fillet dialog box appears.
  2. Click Create fillets on relimited edges as Fillet Definition.
  3. In the Object(s) to fillet field, select an edge.
  4. Define the Radius value.
  5. Click OK.

    The fillet is applied on the edge till the limitation created by the cutout. A new feature (identified as Edge Fillet.x) is added to the tree under the Solid Functional Set.x node.