You can concatenate a 3D multi-cell mono-domain FreeStyle Shape Design curve or a separate contiguous curve into a mono-cell curve. The resulting curve is a
curvature continuous curve (C2).
Before you begin: Open an existing 3D shape with two Join-type elements, and a set of connected curves, each
identified by different colors.
Set the tolerance value to define the maximum parametric deviation allowed
between the selected elements and the resulting curve.
Select the curves to concatenate.
Click Apply.
If the tolerance is compatible, a single curve is shown with its segment
limits.
Click More>>.
Select Information.
The following information is displayed on the resulting curve:
N: Number of control points.
o: Curve order.
s: Number of curve segments.
Maximum deviation.
Select Auto Update Tolerance to
automatically update the tolerance value in case the set value is too low.
