Managing the Robot and Axes

Working with a 3D Support

Work on Support 3D lets you create a 3D support, composed of three regular grid of lines, used both as an input to create geometry as well as a visual help.

  1. In the Labels position list, select one of the options:
    • Full Screen: Labels are displayed all around the screen.
    • Bottom/Left: Labels are displayed on the bottom left of the screen.
    • None: No label is displayed.
  2. In the Label size box, enter the value or use the arrows to change the value.
  3. In the Support Type list, select a support type.
  4. In the Type list, select the type of the visible area, that is the visualization range for each of the three grids.
  5. Click OK in the dialog box.

Important:
  • If you are working in an environment, and provided there are several representations, you can only see the 3D working support whose representation is active. If the product is active, 3D working supports cannot be applied.
  • The children that appear under any feature may not follow the same order as their order of creation.
  • The Work on Support 3D command can be used along with the Measure between command.

 

See Also
More help on this topic