Inserting in a New Geometrical Set

You can create the results of some commands as new geometrical set in the tree.

This command is available with the following commands:

  • Break ,
  • Disassemble ,
  • Copy Geometric Parameters,
  • Apply Dress-Up .
.


Before you begin: Open a 3D shape.
  1. From the Edition section of the action bar,click Break Surface .
    The Break Surface dialog box appears.
  2. In the App Options panel, click Insert in a New Geometrical Set
  3. Select the surface to be cut.
  4. Select the cutting curves.
  5. Click OK.


    All the created surfaces resulting from the break are displayed in a new geometrical set in the tree.