Modifying the Splitting Surface

You can modify a splitting surface.


Before you begin: Keep open the 3D shape created in the previous task.
See Also
Using Control Points
  1. Open the FreeStyle Shape Design app again.
  2. Select the Make YZ the Privileged Plane command of the Robot context menu, depending on the mode you are working in.
  3. Select the surface and click Control points
    The Control Points dialog box appears. Control points and mesh lines are displayed.

  4. Ensure that Normal to Robot is selected in the Control Points dialog box.
  5. Click Constant Law
  6. Click Mesh only
  7. Move the pointer over an edge mesh line and pull down so as to manually deform the surface.
    The cylinder is updated automatically.

  8. Click OK in the Control Points dialog box to validate both surface and cylinder deformation.