-
Select an edge defining the weld.
For a weld created in the Weld Design
app, select the weld representation.
-
In the Welding Symbol dialog box, select the direction
for the weld text side and the indent line side.
-
Enter the values in the required boxes.
- Specify the size of weld, length of weld and
engineering symbols.
- When you select welds created in the Weld Design
app, the welding specifications (size of the weld, length of the weld,
and primary welding symbol) automatically appear which cannot be edited.
You can specify the other editable symbols.
When the knowledge
parameters of the welding features created in the Weld Design
app are modified, all the associated welding annotations are
automatically updated. Note:
If the weld annotation and weld
feature are on two different 3D shapes under the same root product,
move the annotation to display its updated value when the knowledge
parameters are modified.
- When an associative welding symbol is created, it can be connected with
another 3D weld (which may be not be of same type and length) using
geometry connection management without any warning.
-
Specify the primary welding, complementary, and finish symbols.
Notes:
- The Indent line side
 is available only when the welding symbol
System-A is selected in the ISO standard.
- When an elementary or a supplementary symbol is selected, another
pair of these symbols appear above them.
-
The staggered symbol appears based
on the welding staggered display parameter selected between
following:
- Usual: To display the staggered (Z)
symbol in the welding symbol annotation.
- Alternative: To offset the weld
symbol on the opposite side of the reference line. Select
the Alternative welding staggered
display
 to activate the alternative welding staggered symbol.
- The staggered symbol is displayed in the annotation only when a text
is entered in the boxes next to the staggered symbol.
-
Specify the other complementary indications such as field weld and weld tail.
|