Tolerancing and Annotations Properties

The Tolerancing & Annotations lets you display annotation set properties.

Select the Tolerancing & Annotations tab to access properties.

This page discusses:

Detail

Important:

Properties in this section are not editable.

Set Name
Displays the name of the annotation set.
Tip: To rename the annotation set, select the Feature Properties tab.
Standard
Displays the standard of the annotation set.
Specifications
Displays the number of annotations contained in the annotation set.
Specifications Detail
Displays and quantifies the annotations types and sub-types.
Types Sub-Types
Datum
  • Datum Reference Frame
  • Datum System
  • Datum Target
  • Simple Datum
Form
  • Circularity
  • Cylindricity
  • Pattern location
  • Profile of any line
  • Profile of any surface
  • Straightness Axis
  • Straightness Flatness
Size
  • Angular Size
  • Basic dimension
  • Chamfer Dimension
  • Linear Size
  • Second Linear Size
Position Orientation and Runout
  • Angularity
  • Circular runout
  • Concentricity
  • Parallelism
  • Perpendicularity
  • Position
  • Profile of any line with Datum Reference Frame
  • Profile of any surface with Datum Reference Frame
  • Symmetry
  • Total runout
Non Semantic
  • Datum
  • Datum Target
  • Flag Note
  • Geometrical Tolerance
  • Text
  • Note Object Attribute
  • Weld Dimension
Roughness -

Views default ratio

Annotation Set views ratio
Defines the view ratio which is applied to all the annotations contained in new annotation view of the annotation set. This ratio corresponds to a same scale factor applied to all texts, symbols and graphic representations contained in annotations regardless of their own properties. The reverse of this ratio is applied when generating the related 2D drafting view.
  • For an offset or aligned section view:
    • This property is not applicable but still applicable to its annotation view components.
    • When generating 2D drafting view, the ratio of the first annotation view is applied to all the views of the offset or aligned section view.
  • This property does not change the view ratio of existing annotation views of the annotation set, to change an existing annotation views ratio see Ratio in Orientation and Scale property in View properties.