Value Properties | ||
| ||
Dimension Type
Displays the dimension type name, projected dimension in our example.
- Driving
- This property is not relevant for 3D Tolerancing & Annotation and Generative Functional Tolerancing apps.
Value Orientation
- Reference
-
Defines the dimension value reference orientation according to
the following:
- Screen
- View
- Dimension line
- Orientation
-
Defines the dimension value orientation:
- Parallel
- Perpendicular
- Fixed angle
- Angle
-
Defines the dimension value orientation angle.
Important: These properties are only available with the Fixed Angle property of Orientation.
- Position
-
Defines the dimension value position:
- Auto
- Inside
- Outside
- Offset
- Defines the dimension value offset relative to the dimension line.
Dual Value
- Show dual value
- Defines whether a dual dimension value is displayed.
- Location
-
Available location for the dual value are as follows:
- Below
- Fractional
- Side-by-side
Format
- Main Value, Dual Value
-
Defines the dimension format for the main and dual value.
Important: - These properties are only available with the Show dual value property of Value properties.
- For a full
description of the selected tolerance type, click information icon
on the left of the box.
- Description
- Defines the numerical display format applied to the dimension.
- Display
- Defines the factor applied to the dimension.
- Format
-
Defines the representation format for the decimal part of value,
applied to the dimension and the tolerance:
- Decimal
- Fractional
- Precision
- Defines the precision format for the decimal part of value, applied to the dimension and the tolerance.
Fake Dimension
Defines whether the dimension value is faked.
| Important:
Properties in this section are applicable for non-semantic dimensions only. |
- Representation
-
Defines fake dimension representation:
- Numerical
- Alphanumerical
Important: When the Numerical representation is selected, the dimension value is updated according to the dimension geometrical support modification.
Nevertheless if you want to define a specific dimension value independently of its geometrical support, you have to select the Alphanumerical and type in your value.
- Main Value, Dual Value
-
Defines fake dimension representation for the main and dual
value.
Important: - These properties are only available with the Show dual value property of Value properties.
- Texts for numerical fake dimensions are restricted to six characters. If you need to insert a text containing more than six characters, simply use the alphanumeric fake dimension.