View Properties

The View lets you modify view/annotation planes properties.

Select the View tab to access properties.

This page discusses:

Name
Defines the annotation view name.
ID
Defines the annotation view ID.
Suffix
Defines the annotation view suffix.
Formula
Creates a formula to define the annotation view naming.

Orientation and Scale

Angle
This property is not relevant for 3D Tolerancing & Annotation and Generative Functional Tolerancing apps.
Scale
This property is not relevant for 3D Tolerancing & Annotation and Generative Functional Tolerancing apps.

The following view scale values must be considered:

  • Normal range: Scale must be greater than 1.10-5 and lower than 1.104
  • Large range: Scale must be greater than 1.10-7 and lower than 1.102
Note: If you specify a scale outside this scale range, an error appears displaying the scale limits for the current representation.
When properties are edited for a set of views with heterogeneous representation ranges, the authorized scale range is computed as an intersection of allowed scale ranges.
Ratio
Defines the view ratio which is applied to all its annotations.
  • This ratio corresponds to a same scale factor applied to all texts, symbols and graphic representations contained in annotations regardless of their own properties.
  • The reverse of this ratio is applied when generating the related 2D drafting view, except when the view is contained in an offset or aligned section view.

    In these cases, the reverse ratio of the first annotation view is applied to all the views of the offset or aligned section view.

Attributes

Display View Frame
Defines whether the annotation view frame is displayed or not.
Lock View
This property is not relevant for 3D Tolerancing & Annotation and Generative Functional Tolerancing apps.