Defining Slope Profiles

Slope Profile enables you to specify a slope angle for the pit case scenario

  1. In the Slope Profile dialog box, specify the Default Angle.
  2. Specify slopes using an attribute for slope that vary with respect to the location.
    1. Select Specify Slopes by Attribute.
    2. From the Select a Slope Attribute list, select an attribute. For example, Geotech zone.
    3. From the Associate Code with Slope list, select a code (also referred to as geotechnical region), then click Add.

      You can associate all the codes listed by selecting Add all then clicking Add. After adding all the codes (geotechnical regions), individual codes can be removed if they are not required.

  3. Click Ok.