Applying Centrifugal Forces

You can apply a centrifugal force to all bodies in a simulation to mimic the rotation of the model about an axis at a constant velocity.

See Also
About Centrifugal Forces
  1. From the Physics section of the assistant, expand the Loads list and select Clamp.
  2. Select an edge or axis representing the center of rotation from the model.
  3. Optional: Enter a descriptive Name.
  4. Select an edge or axis in the model representing the center of rotation.

    The centrifugal force is applied to all bodies in the model.

  5. Enter the Rotational velocity of the model.
  6. Click OK.