-
From the Model section of the assistant, expand the
Connections list and select
Pin.
-
Select a cylindrical face from the model.
- Optional:
Enter a descriptive
Name.
-
Select
Support 1 and
Support 2 as the geometry supports to be
connected.
One support is the outside face of the cylindrical pin and the
other is the surrounding (inner) face of the outer part. You can only select
cylindrical surfaces for the supports. You can select only a single part as the
outer part, but it may have multiple cylindrical holes, for example a hinge
plate.
- Optional:
Enter a value for the
Torsional stiffness.
Torsion is the twisting of an object due to an applied torque.
By default, the pin has a very small amount of elasticity for torsion (rotation
about its axis). You can use the
Torsional stiffness value to change this
default elasticity.
-
Click
OK.
|