You can create an axis line in the drawing to indicate the cylindrical features.
Before you begin: Open a drawingrepresentation.
From the Annotation section of the action bar, click Axis Line
.
Select two lines.
The axis line is created.
Important:
If needed, you can select two non-parallel lines that
are not co-linear.
Both in the case of center lines and axis lines, a default
overrun is created.
When creating an axis line in a Drafting
context, a message is displayed if the axis line cannot
be associative to the 3D.
In a Drafting context, you can create axis
lines between symbolic fillet edges or fillet representation.
Note that these axis lines will not be associative (a message
will be displayed).
In a Drafting context, depending on the type
of element selected, the axis line is sometimes created
directly after you select a single element. If you are not
satisfied with the axis line thus created, you can force
the selection of a second element by pressing Ctrl prior to making your selection: you will then be able to
select the first and then the second element.
Tip:
If you need
to modify an axis line, see Modifying Center Lines or Axis Lines. Note that you can multi-select
elements when modifying axis lines.