Electrical Manufacturing Preparation Parameters

Segment


Parameter		Value	Description
Representation	Type	DoubleLine/SingleLine	Determines the line type used for Segments. By default, , the value is DoubleLine.
	LineType	Integer	Determines the line type. By default, the value is 1.
	LineThickness	Integer	Determines the line thickness you want to apply. By default, , the value is 1.
Text	Generation	Yes/No	Specifies whether or not to generate an associated text template.
	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
SupportSection	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	Numbering	Yes/No	Specifies whether or not to generate the numbering.
JunctionSection	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	Numbering	Yes/No	Specifies whether or not to generate the numbering.
JunctionSymbol	Generation	Yes/No	Specifies whether or not to display a symbol on harness junctions.
	CatalogName	String	Specifies the name of the catalog and chapter containing the default symbol. By default, the catalog name is unset. You can use the catalog provided by default: Default_Symbol_TT_Catalog.3dxml. The name of the related chapter is JunctionSymbolChapter. Otherwise, you can select another catalog provided that it is loaded in Data Setup.
	SymbolName	String	Specifies the name of the symbol. By default, the name of the symbol is unset. You can use the symbol provided in the default catalog and named: JunctionSymbol.
CuttingSymbol	Generation	Yes/No	Specifies whether or not to display the symbol.
	CatalogName	String	Specifies the name of the catalog containing the symbol.
	SymbolName	String	Specifies the name of the symbol.

Protection


Parameter		Value	Description
Adaptative > Representation	Type	DoubleLine/SingleLine	Determines the linetype used for protective covering. By default, the value is SingleLine.
	LineThickness	Yes/No	Determines the line thickness used for protective covering.
	ThicknessValue	Integer	Determines the line thickness you want to apply. By default, the value is 1.
Adaptative > Filling	Generation	Yes/No	Specifies whether or not to automatically fill with color the inner area of some identified protections. By default, the value is No.
Adaptative > Filling	Keyword	String	Specifies the keyword that identifies the protections to be filled. This keyword has to be added to the External Reference attribute in the properties of the protections. Note: This attribute may also contain the keyword for the 2D details generation. To be both taken into account, keywords have to be separated by a semicolon.
Adaptive > 2DdetailOnExtremities	Generation	Yes/No	Specifies whether or not to automatically generate the 2D Detail on protective covering end. By default, the value is No.
	Coefficient	Integer	Specifies a coefficient that sizes the 2D detail according to the layer of protective covering. By default, the value is 1,1.
	CatalogName	String	Specifies the names of the catalog or chapter containing 2D detail (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
Adaptive > Information Table > Text	Generation	Yes/No	Specifies whether or not to automatically generate an associated text template. By default, the value is No.
	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	LeaderPosition	ProtectionCenter/ProtectionEnd	Specifies the relative position the leader for an information table.
Adaptive > Information Table > Symbol	Generation	Yes/No	Specifies whether or not to automatically generate the 2D Detail on protective covering end. By default, the value is No.
	PositionInInformationTable	Top/Bottom	Specifies the position of the adaptive diameter symbol of the protection in the information table.
	CatalogName	String	Specifies the names of the catalog or chapter in which symbol is defined. (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance. The symbol name is searched based on attribute value of reference part number or the external reference value for protection end symbols.
FixedDiameter > Representation	Type	DoubleLine/SingleLine	Determines the linetype used for protective covering. By default, the value is SingleLine.
	LineThickness	Yes/No	Determines the line thickness you want to apply. By default, the value is 1.
	ThicknessValue	Integer	Determines the line thickness.
FixedDiameter > Filling	Generation	Yes/No	Specifies whether or not to automatically fill with color the inner area of some identified protections. By default, the value is No.
FixedDiameter > Filling	Keyword	String	Specifies the keyword that identifies the protections to be filled. This keyword has to be added to the External Reference attribute in the properties of the protections. Note: This attribute may also contain the keyword for the 2D details generation. To be both taken into account, keywords have to be separated by a semicolon.
FixedDiameter > 2DdetailOnExtremities	Generation	Yes/No	Specifies whether or not to automatically generate the 2D Detail on protective covering end. By default, the value is No.
	Coefficient	Integer	Specifies a coefficient that sizes the 2D detail according to the layer of protective covering. By default, the value is 1,1.
	CatalogName	String	Specifies the names of the catalog or chapter containing 2D details (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
FixedDiameter > Information Table > Text	Generation	Yes/No	Specifies whether or not to generate an associated text template.
	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	LeaderPosition	ProtectionCenter/ProtectionEnd	Specifies the relative position the leader for an information table.
FixedDiameter > Information Table > Symbol	Generation	Yes/No	Specifies whether or not to generate the 2D Detail.
	PositionInInformationTable	Top/Bottom	Specifies the position of the fixed diameter symbol of the protection in the information table.
	CatalogName	String	Specifies the names of the catalog or chapter in which the symbol is defined (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
Tape > Representation	Type	DoubleLine/SingleLine	Determines the linetype used for protective covering. By default, the value is DoubleLine.
	LineThickness	Yes/No	Determines the line thickness you want to apply. By default, the value is 1.
	ThicknessValue	Integer	Determines the line thickness used for protective covering.
Tape > Filling	Generation	Yes/No	Specifies whether or not to automatically fill with color the inner area of some identified protections. By default, the value is No.
Tape > Filling	Keyword	String	Specifies the keyword that identifies the protections to be filled. This keyword has to be added to the External Reference attribute in the properties of the protections. Note: This attribute may also contain the keyword for the 2D details generation. To be both taken into account, keywords have to be separated by a semicolon.
Tape > 2DdetailExtremities	Generation	Yes/No	Specifies whether or not to automatically generate the 2D Detail on protective covering end. By default, the value is No.
	Coefficient	Integer	Specifies a coefficient that sizes the 2D detail according to the layer of protective covering. By default, the value is 1,1.
	CatalogName	String	Specifies the names of the catalog or chapter containing 2D details (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
Tape > Information Table > Text	Generation	Yes/No	Specifies whether or not to automatically generate an associated text template. By default, the value is No.
	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	LeaderPosition	ProtectionCenter/ProtectionEnd	Specifies the relative position the leader for an information table.
Tape > Information Table > Symbol	Generation	Yes/No	Specifies whether or not to generate 2D details.
	PositionInInformationTable	Top/Bottom	Specifies the position tape symbol in the information table.
	CatalogName	String	Specifies the names of the catalog or chapter containing symbol (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance. By default, the name is Catalog_Symbols.
CorrugatedTube > Representation	Type	DoubleLine/SingleLine	Determines the linetype used for protective covering. By default, the value is DoubleLine.
	LineThickness	Yes/No	Determines the line thickness you want to apply. By default, the value is 1.
	ThicknessValue	Integer	Determines the line thickness used for protective covering.
CorrugatedTube > Filling	Generation	Yes/No	Specifies whether or not to automatically fill with color the inner area of some identified protections. By default, the value is No.
CorrugatedTube > Filling	Keyword	String	Specifies the keyword that identifies the protections to be filled. This keyword has to be added to the External Reference attribute in the properties of the protections. Note: This attribute may also contain the keyword for the 2D details generation. To be both taken into account, keywords have to be separated by a semicolon.
CorrugatedTube > 2DdetailOnExtremities	Generation	Yes/No	Specifies whether or not to automatically generate the 2D Detail on protective covering end. By default, the value is No.
	Coefficient	Integer	Specifies a coefficient that sizes the 2D detail according to the layer of protective covering. By default, the value is 1,1.
	CatalogName	String	Specifies the names of the catalog or chapter containing 2D details (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
CorrugatedTube > Information Table > Text	Generation	Yes/No	Specifies whether or not to generate an associated text template. By default, the value is No.
	CatalogName	String	Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TextTemplateName	String	Specifies the name of the text template.
	LeaderPosition	ProtectionCenter/ProtectionEnd	Specifies the relative position the leader for an information table.
CorrugatedTube > Information Table > Symbol	Generation	Yes/No	Specifies whether or not to generate an associated symbol.
	PositionInInformationTable	Top/Bottom	Specifies the position of the corrugated tune symbol in the information table.
	CatalogName	String	Specifies the names of the catalog or chapter containing symbols (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
3DOrientationAngle	Generation	Yes/No	Specifies whether or not to automatically generate the information of the protective covering orientation. By default, the value is No.

Note: Parameters are the same for all protective coverings.

Device

Parameter

Value

Description

SingleInsertConnector > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

CatalogName

String

Specifies the names of the catalog or chapter containing 2D details (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.

2DDetailName

String

Specifies the name of the 2D detail.

SingleInsertConnector > InformationTable > Properties

RelativePositionToRepresentation

Integer

Specifies the relative position of information table with respect to the representation.

VerticalCellMargin

Integer

Specifies the vertical distance between two items.

HorizontalCellMargin

Integer

Specifies the horizontal distance between two items.

SingleInsertConnector > InformationTable > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

Specifies the names of the catalog or chapter containing text templates (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

SingleInsertConnector > InformationTable > Footer

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

SingleInsertConnector > InformationTable > ConnectorTable > Properties

Generation

Yes/No

Specifies whether or not to generate an associated text template.

GenerateHeader

Yes/No

Specifies whether or not to generate an associated text template.

TableSplit

Integer

Specifies the number of lines in a table split.

SpaceBetweenTwoSplit

Integer

Specifies the space separating two splits of the table.

SplitOption

Horizontal/Vertical

Specifies if a table split is horizontal or vertical.

CellMargin

Integer

Specifies the margins value in a table cell.

DisplayUnit

Yes/No

Specifies whether or not to generate an associated text template.

Sorting

Ascending/Descending

Specifies the sorting order.

Priority is always given to numbers. For alphanumeric initial, sorting is performed in alphabetical order and then in numeric order.

Important: The sorting is not case-sensitive.

DisplayEmptyCavity

Yes/No

Specifies whether or not to display empty cavities in the table. When the parameters is set to Yes, a dash (-) appears in the corresponding cells.

MergeDuplicateCavity

Yes/No

Specifies whether or not to merge cells corresponding to duplicated cavities.

Device > SingleInsertConnector > InformationTable > ConnectorTable > AttributeOrder

Column

Specifies the display order for each attribute.

Device > SingleInsertConnector > InformationTable > ConnectorTable > AdditionalAttributes

Generation

Yes/No

Specifies whether or not to generate additional attributes.

TableName

String

Specifies the table name in which additional attributes are defined.

AttributeName

String

Specifies the names of the attributes (names separated by comma) which need to be displayed in the conductor table.

SingleInsertConnector > InformationTable > PinMap

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

PositionInInformationTable

Top/Bottom

Specifies the position of the pin map symbol in the information table.

CatalogName

String

Specifies the names of the catalog or chapter containing pin map symbol.

GroundStud > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

By default, the value is No.

CatalogName

String

Specifies the names of the catalog or chapter containing 2D details(names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.

2DDetailName

String

Specifies the name of the 2D detail.

GroundStud > InformationTable > Properties

RelativePositionToRepresentation

Integer

Specifies the relative position of information table with respect to the representation.

VerticalCellMargin

Integer

Specifies the vertical distance between two items.

HorizontalCellMargin

Integer

Specifies the horizontal distance between two items.

GroundStud > InformationTable > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

GroundStud > InformationTable > Footer

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

GroundStud > InformationTable > ConnectorTable > Properties

Generation

Yes/No

Specifies whether or not to generate an associated text template.

GenerateHeader

Yes/No

Specifies whether or not to generate an associated text template.

TableSplit

Integer

Specifies the number of lines in a table split.

SpaceBetweenTwoSplit

Integer

Specifies the space separating two splits of the table.

CellMargin

Integer

Specifies the margins value in a table cell.

DisplayUnit

Yes/No

Specifies whether or not to generate an associated text template.

Sorting

Ascending/Descending

Specifies the sorting order.

Priority is always given to numbers. For alphanumeric initial, sorting is performed in alphabetical order and then in numeric order.

Important: The sorting is not case-sensitive.

DisplayEmptyCavity

Yes/No

Specifies whether or not to display empty cavities in the table. When the parameters is set to Yes, a dash (-) appears in the corresponding cells.

MergeDuplicateCavity

Yes/No

Specifies whether or not to merge cells corresponding to duplicated cavities.

GroundStud > InformationTable > ConnectorTable > AttributeOrder

Column

Specifies the display order for each attribute.

TerminalStrip > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

CatalogName

String

2DDetailName

String

Specifies the name of the 2D detail.

TerminalStrip > InformationTable > Properties

RelativePositionToRepresentation

Integer

Specifies the relative position of information table with respect to the representation.

VerticalCellMargin

Integer

Specifies the vertical distance between two items.

HorizontalCellMargin

Integer

Specifies the horizontal distance between two items.

TerminalStrip > InformationTable > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

TerminalStrip > InformationTable > Footer

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

TerminalStrip > InformationTable > ConnectorTable > Properties

Generation

Yes/No

Specifies whether or not to generate an associated text template.

GenerateHeader

Yes/No

Specifies whether or not to generate an associated text template.

TableSplit

Integer

Specifies the number of lines in a table split.

SpaceBetweenTwoSplit

Integer

Specifies the space separating two splits of the table.

CellMargin

Integer

Specifies the margins value in a table cell.

DisplayUnit

Yes/No

Specifies whether or not to generate an associated text template.

Sorting

Ascending/Descending

Specifies the sorting order.

Priority is always given to numbers. For alphanumeric initial, sorting is performed in alphabetical order and then in numeric order.

Important: The sorting is not case-sensitive.

DisplayEmptyCavity

Yes/No

Specifies whether or not to display empty cavities in the table. When the parameters is set to Yes, a dash (-) appears in the corresponding cells.

MergeDuplicateCavity

Yes/No

Specifies whether or not to merge cells corresponding to duplicated cavities.

TerminalStrip > InformationTable > ConnectorTable > AttributeOrder

Column

Specifies the display order for each attribute.

TerminalBlock > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

CatalogName

String

2DDetailName

String

Specifies the name of the 2D detail.

TerminalBlock > InformationTable > Properties

RelativePositionToRepresentation

Integer

Specifies the relative position of information table with respect to the representation.

VerticalCellMargin

Integer

Specifies the vertical distance between two items.

HorizontalCellMargin

Integer

Specifies the horizontal distance between two items.

TerminalBlock > InformationTable > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

TerminalBlock > InformationTable > Footer

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

TerminalBlock > InformationTable > ConnectorTable > Properties

Generation

Yes/No

Specifies whether or not to generate an associated text template.

GenerateHeader

Yes/No

Specifies whether or not to generate an associated text template.

TableSplit

Integer

Specifies the number of lines in a table split.

SpaceBetweenTwoSplit

Integer

Specifies the space separating two splits of the table.

CellMargin

Integer

Specifies the margins value in a table cell.

DisplayUnit

Yes/No

Specifies whether or not to generate an associated text template.

Sorting

Ascending/Descending

Specifies the sorting order.

Priority is always given to numbers. For alphanumeric initial, sorting is performed in alphabetical order and then in numeric order.

Important: The sorting is not case-sensitive.

DisplayEmptyCavity

Yes/No

Specifies whether or not to display empty cavities in the table. When the parameters is set to Yes, a dash (-) appears in the corresponding cells.

MergeDuplicateCavity

Yes/No

Specifies whether or not to merge cells corresponding to duplicated cavities.

Device > TerminalBlock > InformationTable > ConnectorTable > AttributeOrder

Column

Specifies the display order for each attribute.

Splice > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

CatalogName

String

2DDetailName

String

Specifies the name of the 2D detail.

Splice > InformationTable > Properties

RelativePositionToRepresentation

Integer

Specifies the relative position of information table with respect to the representation.

VerticalCellMargin

Integer

Specifies the vertical distance between two items.

HorizontalCellMargin

Integer

Specifies the horizontal distance between two items.

Splice > InformationTable > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

Orientation

String

Specifies the orientation of the information table header for a splice.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

TextTemplateAlignment

Left/Right

Specifies the alignment of the text template. By default, Left is selected.

Splice > InformationTable > ConnectorTable > Properties

Generation

Yes/No

Specifies whether or not to generate an associated text template.

GenerateHeader

Yes/No

Specifies whether or not to generate an associated text template header.

GenerateCavityColumn

Yes/No

Specifies whether or not to generate an associated cavity column.

TableSplit

Integer

Specifies the number of lines in a table split.

SpaceBetweenTwoSplit

Integer

Specifies the space separating two splits of the table.

CellMargin

Integer

Specifies the margins value in a table cell.

DisplayUnit

Yes/No

Specifies whether or not to generate an associated text template.

Sorting

Ascending/Descending

Specifies the sorting order.

Priority is always given to numbers. For alphanumeric initial, sorting is performed in alphabetical order and then in numeric order.

Important: The sorting is not case-sensitive.

DisplayEmptyCavity

Yes/No

Specifies whether or not to display empty cavities in the table. When the parameters is set to Yes, a dash (-) appears in the corresponding cells.

MergeDuplicateCavity

Yes/No

Specifies whether or not to merge cells corresponding to duplicated cavities.

Splice > InformationTable > ConnectorTable > AttributeOrder

Column

Specifies the display order for each attribute.

Device > Splice > InformationTable > ConnectorTable > AdditionalAttributes

Generation

Yes/No

Specifies whether or not to generate additional attributes.

TableName

String

Specifies the table name in which additional attributes are defined.

AttributeName

String

Specifies the names of the attributes (names separated by comma) which need to be displayed in the conductor table.

ConnectorShell > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

By default, the value is No.

CatalogName

String

Specifies the names of the catalog or chapter containing 2D detail (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.

2DDetailName

String

Specifies the name of the 2D detail.

ConnectorShell > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

BackShell > Representation

Type

3Dprojection/2D detail

Specifies whether to generate a 3D representation or a 2D detail representing the device.

By default, the value is 3Dprojection.

2DDetailOrientation

Yes/No

Specifies how to orient 2D detail. No (default value): 2D detail is oriented with respect to main drawing view. Yes: 2D detail is oriented with respect to segment tangency.

By default, the value is No.

CatalogName

String

2DDetailName

String

Specifies the name of the 2D details.

BackShell > Header

Generation

Yes/No

Specifies whether or not to generate an associated text template.

By default, the value is No.

CatalogName

String

TextTemplateName

String

Specifies the name of the text template.

GreenLine


Parameter		Value	Description
LoopLine	Display	Yes/No	Specifies whether or not to display the loop lines.
	LineType		Determines the line type used for the green line.
	LineThickness	Integer	Determines the line thickness used for the green line.
DistantLink	Display	Yes/No	Specifies whether or not to display the distant links.
	LineType		Determines the line type used for the green line.
	LineThickness	Integer	Determines the line thickness used for the green line.
MechanicalPart	Display	Yes/No	Specifies whether or not to display the mechanical parts.
	LineType		Determines the line type used for the green line.
	LineThickness	Integer	Determines the line thickness used for the green line.

Sheet


Parameter		Value	Description
Reports > Generation	Generation	Yes/No	Specifies whether or not to generate reports.
Reports > Report Name	Report Name	String	Specifies the report's name.
Reports > Properties	Offset from frame border	Integer	Specifies the offset value of the border frame.
	Table split	Integer	Specifies the number of lines in a table split.
	Space between two split	Integer	Specifies the space between two splits.
	Space between two tables	integer	Specifies the space between two tables.
	Display line number	Yes/No	Specifies whether or not to display the line number.
	Split option	Horizontal/Vertical	Specifies if a split is horizontal or vertical.
	Report Position	Top/Bottom	Specifies the position of a report.
	Sheet Location	-	Specifies in which view the sheet appears.
ColorTable	Generation	Yes/No	Specifies whether or not to generate the color code table. By default, the value is No.
	CatalogName	String	Specifies the names of the catalog or chapter containing color table (names separated by semi-colon). The catalog is the one identified in the Electrical Manufacturing Preparation resources. If no catalog is specified, the system scans all catalogs defined in Electrical Manufacturing Preparation resources. It is recommended to use chapter names to improve search performance.
	TableName	String	Specifies the name of the color table.