-
Name
-
Defines a meaningful name for the sheet.
-
Scale
-
Specifies the scale applicable to all views
in the sheet.
The following sheet scale values must be considered:
-
- Normal range: Scale must be greater than 1.10-5 and lower
than 1.104
- Large range: Scale must be greater than 1.10-7 and lower
than 1.102
Note:
If you specify a scale outside this scale range, an error appears
displaying the scale limits for the current representation.
Projection Method
Properties in this
section apply to all generative views available in the sheet (i.e. created in a
Drafting
context).
For more information about the projection
methods, see About the Projection Methods.
-
First angle standard
-
Creates all views in the sheet using
the first angle standard.
-
Third angle standard
-
Creates all views in the sheet using
the third angle projection standard.
Generative Views Positioning
Mode
Properties in this
section apply to all generative views available in the sheet (i.e. created in a
Drafting
context).
This property is also defined in the Sheet Styles.
-
Part bounding box center
-
Positions generative views according
to the center of the 3D bounding box.
This mode ensures that the center
of the 3D bounding box remains at a fixed position on the sheet, when views
are updated.
-
Part 3D axis
-
Positions generative views according
to the 3D axis system.
This mode ensures that the projection of the 3D axis
remains at a fixed position on the sheet, when views are updated (even if
the center of gravity of the 3D geometry has changed).
Print Area
-
Activate
- Specifies a specific area of the sheet that must be printed.
Doing this activates
the associated fields so that you can define the print area.
In addition, you
must select Document area option as the Print
area in the Print dialog box so that the print area
is printed.
If you do not select the Document area
option, the whole document is printed.
See Printing a Sheet and Visualizing the Print Area for more information.
-
X
-
Specifies the X coordinate of the lower left-hand corner of the print area.
-
Y
-
Specifies the Y coordinate of the lower left-hand corner of the print area.
-
Width
-
Specifies the width of the print area.
-
Height
-
Specifies the height of the print area.
- (apply a format)
Defines a print format for a particular sheet size and its standard.