-
In the Profile box, select the profile to be extruded.
-
In the Direction box, specify the desired extrusion direction.
Note:
- You can select a line to take its orientation as the extrusion direction or a
plane to take its normal as extrusion direction.
- You can also specify the direction by means of X, Y, Z vector components by using
the context menu on the Direction box.
-
In the First Limit and Second Limit boxes, define the extrusion limits.
-
Select Symmetric extrusion
to extrude the profile in the opposite direction using the same dimension value as the one defined for the first dimension.
-
Click Reverse Direction
 or the red arrow in the 3D geometry to display the extrusion on the other side of the selected profile.
-
Click OK to create the extruded surface.
|