Create a Group
You can create a new group and add the desired geometrical entities in it.
- Right-click the desired geometrical set entity in the tree.
- Select the Geometrical Set.x object > Create Group...
command.
The Group dialog box appears.
The Support box indicates the name of the Geometrical Set entity where the group is to be created.If needed, modify the proposed default group name that appears in the Name box.
- In the Inputs box, select entities, that is the inputs, to be excluded from
the group and remain visible in the tree.Other entities become hidden.
Note that the inputs of the group must be the direct children of the geometrical set. You cannot select entities that are not direct children. For instance, if a geometrical set aggregates a sub-geometrical set, the components of the sub-geometrical set cannot be selected as the inputs of the group created on the geometrical set. Indeed, if expanding the group, they would be visualized as the internal features of the group (since they belong to the sub-geometrical set that is inside the group) and as the inputs of the group as well.
- Click OK to create the group.
-
The Activity check box is used as a read-only information. It is selected to inform that the group is collapsed or cleared to inform that the group is expanded.
-
You can click Remove group to reset the group definition.
-