Move 2D-View Section

You can move the 2D-view section along the 3D grid or along the intersection cut direction by inputting values to exactly locate the handles.

Before you begin:
  • You must have access to the Automotive Body in White Template app.
  • Create a representation with a solid, a surface and a volume, for example.
  1. Double-click the 2D-view section in the tree to edit it.
  2. Select the 2D Section Move tab.
  3. In the Incremental value aligned with list, select the direction:
    • View Plane : allows you to move the 2D-view section elements along the visualization plane.

      By default, View Plane is selected.

      Note: If you are working with a 3D support, you can move the 2D-view section along the 3D grid.

      The default primary spacing of Work On Support 3D grid is 100mm for each direction.

    • Intersection Cut Direction: allows you to move the 2D-view section along the direction normal to cutting plane.

      You can switch from Intersection Cut Direction to View Plane and vice-versa by double-clicking the handles.

  4. In the ViewPlane H and ViewPlane V boxes, specify the values to define the location of handles.
  5. Click OK.
    The 2D-view section is moved.