Creating Hybrid 3D Shapes

You can create hybrid 3D shapes comprising wireframe, surface and solid geometry.

Before you begin: You must have access to the Part Design app.
  1. Click Multi-sections Surface .
  2. Create a multi-sections surface between the curved edges of the two pads.




  3. Create another multi-sections surface between the bottom edges of the two pads.




  4. Click Sweep and create a swept surface between two opposite vertical edges of the two pads.


  5. Create another swept surface on the other side of the side of the two pads.


  6. Click Join then select the four surfaces to create a single joined surface.


  7. Open the Part Design app and click Close Surface .
  8. Select the joined surface in order to close it.
    The model and specification is updated with the Close Surface feature.