Defining Standard Component

Standard Definition lets you define the standard component by specifying the host type and other parameters.

Before you begin:
  • Assign the Common Reference System resource in the Common Geometry Resource resource table in Data Setup.

  • Create a 3D shape under a root product and define parameters.

  1. In the Reference box, select the 3D shape.
  2. Select the axis system as a reference to position the part component.
    1. Under Axis List, click Add an Axis System .
      The Axis System.1 is added in the Axis Name column.
    2. Optional: To add another axis system, click Add an Axis System .
    3. In the Host Type column, select any of the following host types.

      • Curve
      • Surface
      • Point
      • Axis

      Note: Click available at the right of each row to remove the corresponding row containing axis system and host.
  3. Optional: Select a predefined volume other than the volume of the component.

    The selected volume is considered for interference computation and space reservation.

  4. Optional: In the Snapping Planes box, select the reference planes to align a component.
  5. In the Public Parameters box, select the required parameters.

 

See Also
More help on this topic